Відео

Amazon. I looked up the PN on OEM diagrams and then just searched Amazon. Here is one. a.co/d/6IVw2Bj a.co/d/hlcF7Ph a.co/d/0bizMD3

You can't, FA quit making it years ago. HideAway makes a Layout Blind Bag that is sorta close and then FA new layout blind bag is sorta close. www.ebay.com/itm/186085195291

Then most likely the Bendix Gear is shot.

I don’t even notice it when mounted …

Agree. I don't feel any difference in my swing.

5oz. smaller than a woman's petite filet. Wish I was good enough to actually feel it when mounting or swinging....

They have a cheap trade in program

You should subscribe to their channel so you will be informed…

@@oldfarmer3001 I bought directly from Shotkam themselves. No mention of it when I talked to them personally asking a few questions or when I actually bought it.

Same here :( less than 6 months old my gen 3, if I even heard a whisper of a new unit I would of waited... for me the zoom feature, i.e zoom OUT to see more of the shot composition would of been worth the upgrade alone! let alone all the excellent features. These cameras are NOT cheap, I cannot help but feel disappointed now :( I had to pay off my gen 3 over 6 months on CC. Do feel a little less love towards this product now. Especially as the cut into the actual footage (zoom in) taken on Gen 3 is so much leaving you always wanting to see more around the shot. I am sad.

@@oldfarmer3001 I have been for years, there wasn;t a mention of the upgrade at all in advance

It never hurts to call them up and see what they can do for you. I sold my gen 1 when gen 2 came out, same with gen 2 when 3 came out without too bad of a hit. But that was way before they have become this popular.

Glad it helped.

eBay. The seller is no longer registered, but here is the old link. www.ebay.com/usr/wesellithere And that was the listing title. New 54-7032 Starter Drive Bendix Gear Kit For Kohler Starters 3209801S 32-098-01

Yep. I hunted YEARS, like 10, out of a Avery Finisher and I think this is very close to the size if a tad bit more narrow and for sure taller.

Can't say much, only got one hunt in mine last year. Hopefully more this year.

Thanks for the info

Interesting. I only hunted out of it once, but I thought the back rest was pretty conformable.

Hi Dave, tighten them up by pulling on the end of the strap.

Nope. Jeff designed those chokes to shoot big shot size and not hurt the choke. Something small like #1 should be fine. I've shot a lot of BB through mine with no issue.

@@Drundel That's good to hear. I do wonder why so many people on the forums reported their .675 bulging with steel, particularly with benellis - even wad wizard told me via email not to use number 1 steel through it.

@@mrsmith9079 Unless something has changed, the Terror Tubes were made by SureCycle, not Wad Wizzard.

Just heard back from Sure Cycle, they don't make them anymore. I've dropped Jeff an email

Yep. I've used it once so far and it is, it super quick and easy and that big cushion for your butt is great, really good for taking a nap on those slow hunts. Two things, the arm rests/side connectors have a sharp plastic side and WILL dig into the material, just think of all the times gear is piled on top, down bumpy roads, etc. Get some cheap pool noodles and cut rings to put over the ends to keep them off the fabric.

3/4 of these were original and working fine, so say 13 years? The other was around 8 years old and working fine. I only replaced them as they were destroyed removing the axles; I had planned on just greasing them. And yes, I commented in the video that I pressed on the wrong area of the bearing. The kit I used did not have the right side to press on the outer edge of the bearing; I have since remedied that. I used the ATV this week while hunting and pulling a trailer through a rice field loaded with decoys and blinds. Bearing seem fine, hopefully they last 10 more years.

Man wish I could tell you, we've been hunting from panels and blankets since I got it and still haven't had a chance to use it.

@@Drundel no worries thanks for getting back to me. Trying to decide between this one and the rogers Goosebuster xl

@@trevorskinner2381 My only thoughts on that are pinless vs pins. Cold hands in cold windy days suck. I do wish you could adjust the height of the blind, but if my buddies complain too much, I have an idea how to mod it for that. Oh and the XL is waterproof, that can be a huge benefit in a wet field. I have an LP XL and that is a lifesaver in a wet rice field.

@@Drundel did you make it adjustable?

@@samuelcarter8238Nope. I did read a review on rogers that some people aren't using the side supports and just a blind bag to hold up the leg part. It really lowered the height of the blind.

Man there really wasn't all that much to it. Get a dremel with a cutting disc and cut on both side of that cup until you cut through the hog ring.

I do not.

I don't really remember, but most likely a Trulock Light Mod. That's my usually goto for dove. If they were closer, then a Trulock IC.

Lots of places have them. Boca, eBay, Amazon, just have to search for them.

I suggest you watch it again. I never replace any bearings, I replace bushings. Ie, I take out plastic bushings and install metal bearings in their place.

No, they are the carbontex style drag washes. And I think they are lubed dry

No carbon will last many years

e-mail me.